Bed liner is a functional and stylish addition to a truck that will provide immunity to scratches, dents, and corrosion. Whether as a commercial vehicle or for weekend off-roading or just daily driving, a bed liner can greatly enhance the life of the truck bed and boost its aesthetics.
In this article, you will find information on bed liner installation and getting the best outcome for your car.
Step By Step Procedure of Installation
Take a look at the steps below:
Step 1: Prepare Your Truck Bed
It is very important to point out that you should first wash your truck bed before applying any type of bed liner. Clean surface of dirt and debris, scraper and pull out any remnants of the old liner materials.
For the kind of liner that is sprayed or rolled on, you need to rough the substrate with some sand paper before applying to the liner as it creates a good grip. The third process is washing the surface using a degreaser after sanding the surface to ensure that there is no dust or grease on the surface.
Step 2: Choose the Right Liner
Choose the type of liner that will be suitable to fit in your case. If you go for the drop-in liner, make sure it is suitable to your make and model of the truck. In case of products that have to be sprayed-on or rolled-on, it is important to read the instruction provided by the manufacturer on how to proceed.
Step 3: Use of Drop-In Bed Liners
Position the Liner: Take precaution to correctly fit the drop-in liner to the truck bed lining so that it forms a good contact with the floor of the pickup.
Secure the Liner: The most common liners are those which are floored, and most floor liners come with hardware for installing them. To secure your structure, you can use drill with screw or bolts depending on the kind recommended by the manufacturer of your machine. The former denies the liner from shifting during use to allow effective and efficient use.
Step 4: Spray-On Bed Liners as an application
Masking: Mask off the areas which require no liner application using painter’s tape especially round the edges of the tailgate of the truck.
Spray Application: With the help of the spray gun, apply the liner on the bed surface uniformly. Moisten the walls from left to right all the way to the right and it is better to paint at least three thin coats than one thick coat. Let every coat dry according to the direction that comes with the product.
Conclusion
The act of putting on a bed liner is money well spent for any truck owner since it offers, protection, functionality, and style. It is necessary to know how to complete all of these steps to attain the optimum installation for your house or building.
No matter whether the liner is a drop-in type or sprayed on or rolled on liner, ensuring that you install the bed liner well shall go a long way in ensuring that your truck looks and responds as it is required for many years.
